We can almost not stress enough on how fresh water management is essential in today’s world and recycling Grey water becomes an integral part of that. When we leave the water in our sink on without really worrying about turning it off when not in use, we waste more water than we use in a day. Just because the tap happens to be open and the fact that right now you have plenty of water does not mean that you just leave it open even when not needed. This is exactly why I do believe that the ones with motion sensors are such a boon. But what if you cannot afford that?
Ava Vanity Basin is designed to re-use the clean water that would normally be wasted down the drain or to grey-water when the tap is running and no washing or use is in progress. This ensures that you do not waste a lot of water and the water used in your sink is re-used for purposes such as flushing your toilet or even gardening. It is designed with a simple melamine thermoset injection moulded casing, polycarbonate poppet valve with PU seal that has a simple assembly process managed with-in seconds using a snap fit anchor on the valve foot. The valve may be retro-fitted to existing basins and has varied basin applications from the bathroom vanity to the kitchen. The poppet valve opens when its spring return pressure is over come by the downwards fluid force of the water.
The water re-use valve transcends simplicity and makes use of all water that is flowing to the basin. If the water is not used for cleaning or other purposes at the basin then it is diverted for reuse. While the system is really nice and wonderful in conserving water and making sure it is not wasted, at the end of the day if we just happen to be slightly more responsible and a tad bit less lazy then it will still work just great!
